Set analog voltage on slow analog output Description

This example shows how to set analog voltage of slow analog outputs on Red Pitaya extension connector. Slow analog outputs on Red Pitaya are in range from 0 to 1.8 Volts. Required hardware

  • Red Pitaya
  • Voltmeter
../../../_images/Set_analog_voltage_on_slow_analog_input1.png Circuit

../../../_images/Set_analog_voltage_on_slow_analog_input_circuit1.png Code - MATLAB®

The code is written in MATLAB. In the code we use SCPI commands and TCP/IP communication. Copy code from below to MATLAB editor, save project and press run.

%% Define Red Pitaya as TCP/IP object
IP= '';          % Input IP of your Red Pitaya...
port = 5000;
tcpipObj=tcpip(IP, port);

%% Open connection with your Red Pitaya

tcpipObj.Terminator = 'CR/LF';

fprintf(tcpipObj,'ANALOG:PIN AOUT0,0.3');  % 0.3 Volts is set on output 0
fprintf(tcpipObj,'ANALOG:PIN AOUT1,0.9');
fprintf(tcpipObj,'ANALOG:PIN AOUT2,1');
fprintf(tcpipObj,'ANALOG:PIN AOUT3,1.5');

view rawanalog_outputs.m
Code - C

/* Set analog voltage on slow analog output */

#include <stdio.h>
#include <stdlib.h>

#include "redpitaya/rp.h"

int main (int argc, char **argv) {
    float value [4];

    // Voltages can be provided as an argument (default is 1V)
    for (int i=0; i<4; i++) {
        if (argc > (1+i)) {
            value [i] = atof(argv[1+i]);
        } else {
            value [i] = 1.0;
        printf("Voltage setting for AO[%i] = %1.1fV\n", i, value [i]);

    // Initialization of API
    if (rp_Init() != RP_OK) {
        fprintf(stderr, "Red Pitaya API init failed!\n");
        return EXIT_FAILURE;

    // Setting a voltage for each ananlog output
    for (int i=0; i<4; i++) {
        int status = rp_AOpinSetValue(i, value[i]);
        if (status != RP_OK) {
            printf("Could not set AO[%i] voltage.\n", i);

    // wait for user input

    // Releasing resources

    return EXIT_SUCCESS;
} Code - Python


import sys
import redpitaya_scpi as scpi

rp_s = scpi.scpi(sys.argv[1])

value = [1,1,1,1]
for i in range(4):
    if len(sys.argv) > (i+2):
        value[i] = sys.argv[i+2]
    print ("Voltage setting for AO["+str(i)+"] = "+str(value[i])+"V")

for i in range(4):
    rp_s.tx_txt('ANALOG:PIN AOUT' + str(i) + ',' + str(value[i])) Code - LabVIEW